.NET Microcontroller upgrade: FEZ Panda I

Posted in .NET Micro, Uncategorized on June 22nd, 2011 by Samurai

“Upgraded” my FEZ Panda I board to give me access to most of the pins. I went from the typical number of Arduino pins to over 50 I/O pins and now 4 COM ports.


More Pins:

.NET Micro Joystick Debugging and Working

Posted in .NET Micro on June 16th, 2011 by Samurai

Here is the video on using the .NET Micro Framework and creating the joystick. We are going to play with the picture-in-picture feature and see how this goes. Except for the realtime debugging feature of working in .NET and Visual Studio, everything here can be done on other controllers. There is more to add, but the features get away from other microcontrollers. If interest is there I may continue on and show how to implement other features that make the code a lot easier to read and use.


AnalogIn and Interrupts combined

Posted in .NET Micro on June 15th, 2011 by Samurai

Now that we can create interrupts for buttons and create read an analog device, we can combine them into a useful class. We will create a simple joystick class to interface with the Sparkfun joystick that allows the operator to push down on the joystick to trigger a button.


First thing is to breakout what the joystick really is. We have the button and 2 analog sensors (1 for each axis). The class will use the button we have already created and the xaxis analog pin. We will create another analog pin for the yaxis as well. We will reuse most of the code we have already created. Depending on the level of interest, the next few steps will show this working on the board, debugging, and converting the class to be more reusable and allow applications to be event driven.

Reading Analog Values

Posted in .NET Micro on June 14th, 2011 by Samurai

A quick video showing how to read analog values.

Blinking LEDs now with Buttons

Posted in .NET Micro on June 13th, 2011 by Samurai

Adding on to the Blinking LED video, this one adds a button to control the LED.

Blinking LED

Posted in .NET Micro on June 13th, 2011 by Samurai

Short video on how to blink an LED on the .NET Micro Framework.