PSI Test

Posted in Arduino, BlinkM, PSI on July 30th, 2008 by Samurai

Ok so now a test with the PSIs. This is a lit room, and the camera exposure adjustment is going a little crazy causing some weird color transitions that aren’t there in person.

The color transitions are are fade the color switches immediately using a different command.

The tube is a resin on from Keith. The the filters are pieces of milks jugs. There are 2 inside the tube and the one that is being held is the rough part, usually at the handle. The color test is the same test routine as was done with the holoprojectors. The tube is open at the back and the inside should be lined with aluminum tape to improve the lighting effect. There is a little bit of a hot spot, not as much as it appears in the video, but if the LED is moved further away it goes away without any decrease in the lighting

Holoprojector Illumination

Posted in Arduino, BlinkM, Holoprojectors on July 26th, 2008 by Samurai

Well I now have a new toy to play with. I have just been testing it now as it just came in last night. These look like they are going to work out very well. A quick teaser until I can get some photos and have the time to write something up on it. I also wanted to test out how the our HD camera’s video shows up on the blog.

BTW, the video was taken in a lit room with all the windows open. This setup is only the default color switching. The real setup will be a blue flickering. The flickering can be sequenced to sound or programed into the LED. The programed version makes only power vires to be run up to the LED to trigger the color changing.